PROJECTVITRUM
Determine the thickness of your fully-compliant glass laminate using the DEFENDER system
If you wish to choose a different type of structure, log into: programmavetro.it
Choose the intended use
- Step
- Walkable surface
- Roof
- Partitions and Windows
- Parapets
Choose the type of step
- Step on 4 sides
- Step on 3 sides
- Step on 2 sides
- Elementi Sagomati
Choose the type of walkable surface
- Surface with 4-side support
- Surface with 3-side support
- Surface with 2-side support
- Elementi Sagomati
Choose the type of roof
- Roof/Canopy with 4-side support
- Roof/Canopy with 3-side support
- Roof/Canopy with 2-side support
- Elementi Sagomati
Choose the type of wall / window
- Partitions and windows fixed on 4 sides
- Partitions and windows fixed on 3 sides
- Partitions and windows fixed on 2 sides
- Elementi Sagomati
Choose the type of parapet
- Parapet recess-fixed at the base
Chose the installation area
- Indoor area
- Outdoor uncovered or sheltered area
Select the type of wall to be sized
- Windows and partitions subjected to external loads
- Movable Walls - Internal Partitions
Choose whether you prefer to do the dimensioning based on safety and performance or ONLY on safety
- Guarantee safety and performance
- Garantee ONLY safety
Choose the type of fixing
Floor RECESS FIXING:
zero clearance
70mm min
Top HINGE:
with clearance
20mm min
Floor HINGE:
with clearance
20mm min
Top HINGE:
with clearance
20mm min
Floor RECESS FIXING:
zero clearance
70mm min
Top RECESS FIXING:
zero clearance
70mm min
- Calculation done as per CNR DT210:2013
- Calculation done under
CPR 305/2011
Choose the railing manufacturer
- Generic connection
- Defender
- Sabco
- Translevel di OnLevel
Choose the system that best meets your requirements
- Generic
floor fixing - Generic
side fixing
- Floor fixing
(DEFENDER 810 LM) - Floor fixing
(DEFENDER LM)
- Floor fixing on one side
(DEFENDER MS) - Floor fixing
with side foot
(DEFENDER DK)
- Side fixing
(DEFENDER FR) - Side fixing
with foot at the base
(DEFENDER SP)
- Small floor fixing
(DEFENDER XP) - Small floor fixing on one side
(DEFENDER pico)
- SABCO mod. 007010
floor fixing - SABCO mod. 007011
side fixing
- Floor fixing
GARDA SP 200 - Aluvetro - Floor fixing
side installation
GARDA SP 200 Special - Aluvetro
- Side fixing
GARDA FS 200 Special- Aluvetro
- Embedded in floor
GARDA AP 200 - Aluvetro - Embedded in floor
side installation
GARDA AP 200 Special- Aluvetro
- Floor fixing
Translevel by ONLEVEL - Side fixing
Translevel by ONLEVEL
Enter the dimensions in [mm]
In order to continue, you need to select the type of support
Side 1 | Side 1 | |||
- + |
- + |
Wall H. | Upper H. | |||
- + |
- + |
Is the partition/window exposed to human impact load?
No
Yes
Is the upper edge of the partition / window under 6m from the street level?
No
Yes
Does the roof/canopy need accessibility for maintenance?
No
Yes
Select the place of installation
Region | |
Province | |
Municipality | |
Altitude | |
Topography | |
Roughness Category | |
Distance from the sea | |
Watertight structure |
-
+
Uniformly Distributed Load
-
+
Load time
-
+
Operating Temperature
 
Operating Temperature
 
 
min temperature:
max temperature:
-
+
Choose the laminating plastic
Plastics considered "rigid"
Characterized plastics
Plastics not characterized
Composite interlayer
Use polymers with an Avis Tecnique to be used in safety glass
Edge finish quality
Rough polished
Shiny ground
Non-slip glass
NO
of generic type
YES: Madras 8mm
YES: Madras 10mm
Madras - Ecosat Flooring
Madras - Grid XP Flooring
Madras - Matrix Flooring
Madras - Pixel Flooring
Consequence class
ULS or LSC
ULTIMATE Limit State (ULS)
+
SERVICEABILITY Limit State(sLS)
+
SERVICEABILITY Limit State(sLS)
COLLAPSE Limit State (CLS)
according to CNR DT210
Calculation in progress ...